Welcome to Shenzhen Dixun Technology Co., Ltd!
Time:2019-08-01| Author:admin
1. LCD splicing screen, long service life, low maintenance cost. LCD is the display device with the longest lifespan, with a very long lifespan. Even the shortest lifespan backlight can last for over 50000 hours, and even if used for more than this long time, it will only affect its brightness. Simply replace the backlight tube to restore the original bright color. This is fundamentally different from a rear projection, as the lifespan of a liquid crystal backlight is ten times that of a rear projection bulb; The biggest difference from projection is that BSV liquid crystal splicing technology is more mature, with obvious power savings, and its advantages and disadvantages are self-evident.
2. The LCD splicing screen has a large viewing angle. For early LCD products, visual angle was once a major constraint on LCD, but with the continuous progress of LCD technology, this problem has been completely solved. The DID LCD screen used in the LCD splicing curtain wall can achieve a dual viewing angle of over 178 degrees, which has already achieved an absolute viewing angle effect.
3. The LCD splicing screen has high resolution and bright graphics. The dot pitch of liquid crystal is much smaller than that of plasma, and its physical resolution can easily reach or exceed high-definition standards. The brightness and contrast of liquid crystal are high, and the colors are bright and bright. The pure flat display has no curvature, and the image is stable and not flickering.
4. The LCD splicing screen is ultra-thin and lightweight. Liquid crystal has the characteristics of thin thickness and light weight, which can be easily spliced and installed. The 40 inch dedicated LCD screen weighs only 12.5KG and has a thickness of less than 10cm, which is incomparable to other display devices.
5. Low power consumption and low heat generation. LCD display devices have always been praised for their low power and low heat generation. The power of small-sized LCD screens should not exceed 35W, and LCD screens larger than 40 inches only have a power of about 150W, which is only about one-third to quarter of that of plasma.
6. The LCD splicing screen has a long fault free time and low maintenance cost. Liquid crystal is currently the most stable and reliable display device. Due to its small heat output, the device is very stable and will not malfunction due to excessive temperature rise of the component.
7. Innovation and progressiveness
46 inch ultra narrow edge LCD splicing, with only 6.7mm stitching. Currently, the 55 inch LED backlight ultra narrow edge LCD splicing is only 5.5mm, which is currently the most advanced LCD splicing. Samsung is also developing a glass like type of splicing that can penetrate through the edges, which will become a new era for DID LCD splicing.
Of course, due to the current use of cathode vacuum tubes (CCFL) as the backlight for LCD products, the size of the LCD panel is limited by the filament and socket at both ends of the lamp. Currently, the frame of the DID LCD screen used for splicing is still 4mm-10mm wide, so a slightly larger splicing seam is the only disadvantage of LCD splicing curtain walls. However, with the investment of BSV-LED backlight technology, this defect will be significantly improved.
8. Economy
Considering the economy of the system, it should be considered from the perspective of cost-effectiveness. Only under the premise of high performance and quality, can the economy of the system be meaningful.
Currently on the market